| Recent product discussions |
 |
Spektrum Dx6i Mode2 w/ 6200 Rx
|
any timeline for DX5e and DX3R Surface Radio? |
|
 |
ZIPPY-R 2400mAh 25C 2S1P
|
Was reckoning that the comment in "REVIEWS" about the "Weight" was just another misunderstanding re Product Weight & "Shipping Weight/Volume.
But it's a good p |
|
 |
WASP V3 Upgrade Pack
|
it's a collective pitch head, but changing from fp to cp is going to be at least another servo and a radio to support CP.
If your happy with your wasp FP and |
|
 |
TR 28-30B 14A 1050Kv Brushless Outrunner
|
When will these be in stock? |
|
 |
IMAX B8 Charger/Discharger 1-8 Cells
|
you can charge it but you can't balance it so you need an external balancer, or you can with an adapter charge 2x2S with the 4S setting but the batteries needs |
|
 |
Corona Synthesized Receiver 4Ch 40Mhz (v2)
|
Is it possible to shorten the antenna wire? I'm using this in my off-road buggy and it should be fine if the antenna could be half the original lenght. |
|
 |
HK Extra 300 .10e 3D ARF
|
Is this a sport plane or 3D plane..anyone can do prop hang with this plane? need some infor here. Seems the aieleron surface is too small. |
|
 |
iMAX Software Kit.
|
Is it compatible with iCharger 1010B? |
|
 |
TURNIGY 2204-14T 19g Outrunner
|
Will this motor work with a Tower Pro 9g ESC? I have tried 2 motors so far and neither of them work on this ESC. Hoping someone can tell me one way or the oth |
|
 |
HXT 180mAh 12-20C Single Cell
|
How can i charge this cell, volts and amps for a better charge??? |
|
 |
TowerPro Brushless Outrunner TP2409_12D
|
I tried to reverse the shaft, imposible if I want to maintain the motor unharmed. Of course I unscrew the prisioner allen bolt. Apparently the shaft is very thi |
|
.jpg&width=60&height=60&quality=100&ip=1) |
Brushless Outrunner TowerPro-2515-10T
|
The info above suggests a 9x6 or 10x5 prop.
|
|
 |
MKS 380 Aeroplane Gyro
|
The gyro has the standard 3-wire cable plus a single orange cable with a female plug. This single cable is not mentioned in the instructions, what does it do, w |
|
 |
Fiberglass Landing Gear (Regular)
|
Please add within the de******ion full detailed dimensions, otherwise we could not evaluate if such landing gear fits in our planes. |
|
 |
HGD digital 201 Carbon Gear BB Alloy - 9.1g / .07s / .9kg
|
2 times people have asked if it will work with ds mode on gy401 gyro, please answer |
|
 |
iMAX iBEC 6A Linear Regulator & Glow Drv.
|
Can you adjust the ignitión point of the glow plug with the throttle control of the radio? Thanks |
|
 |
GT A-6 Charger/balancer/discharger
|
I make up my own packs. Does Hobbycity sell the plugs with pigtails that fit the GT-A6 for 2, 3 and 4-cell packs? What are their part numbers? |
|
 |
Full Carbon Fiber 600 size blades (600 x 55mm)
|
Hello!
I need 600mm size blades wiht parametrs:
1. Hole size 4 mm
2. Thickness 14 mm
Are this blades suitiable for my task?
May be you can recommend ano |
|
 |
Sullivan Gold-N-Rod 36in/91cm Precision 4-40
|
"2 Clevis sets & accessories (4-40)"
What does the 4-40 stand for, i can*t figure out the measurements. Please state all measurements in metric also ...
Grtz, |
|
 |
hexTronik 2 gram Brushless Outrunner 7700kv
|
Dan:
I measures 1.7A with the gws3020
Tiger:
I fly mine with an Spektrum AR6300 RX and 2 toki servos. Near vertical prestanda but i installed my tokis wrong |
|
Your account
